Responsibilities







* Develop process flow diagrams.
* Drive alarm management to completion and provide support for continuing success.
* Solicit input from all appropriate resources (engineering, operations, and maintenance) and balance conflicting requirements.
* Direct, coordinate, or participate in Process Safety Review or Management of Change process.
* Initiate communications with affected areas and produce progress reports.
* Provide engineering assistance and expertise to Operations and Maintenance as needed.
* Supervise and mentor Coop Students.
* Continuously initiate ways to improve plant operations, safety and environmental performance through day-to-day activities and recommendations for optimized unit conditions.
* Drive continuous variable cost improvement.
* Work with Technology group to optimize plant operating conditions to maximize profitability.
* Provide engineering assistance for environmental permitting requirements.
* Review and make recommendations to keep the plants operating envelope current.
* Manage capital and expense projects utilizing the Capital Value Process.
* Coordinate field construction and establish a schedule of activities.
* Coordinate activities with the other operations engineers to assure full value across the entire unit is realized.
* Spend time in the control room and listen to the ideas of technicians and shift managers to gather ideas for safety and cost improvement.
* Obtain process and operating data to perform calculations for feasibility studies, process studies, and evaluations. Investigate assignments and establish plans with objectives and a schedule.
* Around the clock support during plant outages including confined space work.

REQUIRED EXPERIENCE







* Plant experience with chemical manufacturing experience and a Degree in Chemical Engineering

Responsibilities include:







* Developing process controls execution strategies in conjunction with overall project development team
* Participate in P&ID development and Operability and Hazard Reviews
* Create, check or approve specifications of process control equipment including control valves, relief valves, flow measurement devices, process instrumentation, analytical systems, and DCS, PLC, and SCADA systems
* Identify and manage process controls technical risk items
* Manage a teams schedule, budget, and quality which can include a local in-house design team, geographically remote engineering and design center, or an outside engineering EPC
* Review SIL assessments and author SIL verification
* Participate in Control System Design reviews
* Responsible for Cyber Security aspects of their scope of supply
* Participate in Factory Acceptance Testing of Process Automation equipment (DCS, Analyzers, PDC)
* Production and maintenance of instrument summaries
* Participate in plant commissioning, BPCS / SIS validations, SAT, and startups.
* Manage deliverables and report to project management about progress.
* May participate in preparing cost estimates for valves, instrumentation, analytical equipment, DCS equipment, SIS equipment and labor

Requirements:
* Bachelor's degree in Chemical, Mechanical, or Electrical Engineering
* At least 8 years of applicable work experience
* Ability to demonstrate a deep understanding of the design and implementation of control and instrumentation systems for process plants; provide and discuss examples
* Experience developing BPCS / SIS architectures, control applications, and hardware specifications using Siemens PCS7; additional experience with other controls platforms is a plus
* Must be able to demonstrate technical competence, leadership skills, communicate effectively
* Instrumentation specification authoring in Smart-Plant Instrumentation toolset
* Must be able to lead and direct the work of junior engineers assigned to projects

The Process Controls Engineer will work on industrial process control systems changes driven by capital projects, standard methodologies, plant production initiatives and reliability improvement efforts. This individual will work closely with regional controls engineers, area managers, site supervisors and operating staff. S/he would be expected to gain working knowledge of the process control systems at various locations in the Baton Rouge/New Orleans, LA areas.






Principal responsibilities:

* Support control system troubleshooting & upset investigations.
* Identify, implement and support improvement projects related to the DCS & SIS systems.
* Provides process control systems engineering support for facilities located in & around the Houston area.
* Long-term planning and support of the control systems with respect to programming, preventive maintenance and migration.
* Implement changes to the control logic, HMI, database, documentation of these changes and direct operator support.
* Align with local I&E technicians, providing support and involvement with instrument related maintenance tasks.
* Contribute to the improvement and optimization of existing assets, addressing instrumentation/automation system obsolescence issues and meeting organizational goals for safety, reliability, cyber security, cost reduction contributions.

Qualifications:

* B.S. in Chemical, Mechanical or Electrical Engineering or Engineering Technology with relevant 5 or more years of control systems experience (Associate's Degree or equivalent military training and a minimum of 10 years of controls systems experience will also be considered).
* Be self-motivated and have strong interpersonal and communication skills.
* This individual must be capable of working in a team environment with shared responsibilities.

Desired Skills:

* Hands-on knowledge of control systems (DCS/PLC). Emphasis will be placed on skills related to ABB S+, Siemens (Moore) APACS, Siemens PCS7 and Honeywell control systems.
* Knowledge of field instrumentation, including valves and transmitters
* Proficiency and experience with concepts related to level, temperature, pressure and flow measurement.
* Knowledge of computer networks as relates to Industrial Control Systems.
* General knowledge of Cyber Security implementation as relates to Industrial Control Systems.
* General knowledge of Safety Instrumented Systems as applicable to Mechanical Integrity.
* Process knowledge relating to plant operations.
*

Control internal processes by defining and analyzing the manufacturing process of both milling and filling operations for improvement in quality, safety, and efficiency, and creating, improving, and maintaining manufacturing Process Instructions (PI) and salvage/rework integration.
Here's what you can expect every day:







* Develop safety procedures to be employed by workers operating equipment or working in close proximity to on-going chemical reactions.
* Troubleshoot problems with chemical manufacturing processes.
* Evaluate chemical equipment and processes to identify ways to optimize performance or to ensure compliance with safety and environmental regulations.
* Conduct research to develop new and improved chemical manufacturing processes.
* Determine most effective arrangement of operations such as mixing, crushing, heat transfer, distillation, and drying.
* Perform tests and monitor performance of processes throughout stages of production to determine degree of control over variables such as temperature, density, specific gravity, and pressure.
* Design and plan layout of equipment.
* Prepare estimate of production costs and production progress reports for management.

Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.LI19
Required Experience:







* BS in Mechanical Engineering or Chemical Engineering preferred. Industrial and Electrical Engineers with hands-on mechanical & chemical experience will also be considered.
* 5+ years of engineering job experience.
* Good process management, written and verbal communication skills are required along with a high level of initiative.

Demonstrated strong leadership skills, in project and people management in a continuous improvement environment in the areas of production, safety, quality and Lean manufacturing principles

Responsible for the integrity management of assigned equipment.

Define and periodically review Operating Envelopes of assigned equipment.

Primary responsibility for daily plant operation.

Establish communications with appropriate operations personnel.

Report investigation results with appropriate conclusions and recommendations.

Main liaison between Site and water treatment services provider (currently Nalco)

Track yields, production, and feed stock information into month end closing.

Issue daily shift Instructions.

Develop process flow diagrams.

Drive alarm management to completion and provide support for continuing success.

Solicit input from all appropriate resources (engineering, operations, and maintenance) and balance conflicting requirements.

Direct, coordinate, or participate in Process Safety Review or Management of Change process.

Initiate communications with affected areas and produce progress reports.

Provide engineering assistance and expertise to Operations and Maintenance as needed.

Supervise and mentor Coop Students.

Continuously initiate ways to improve plant operations, safety and environmental performance through day-to-day activities and recommendations for optimized unit conditions.

Drive continuous variable cost improvement.

Work with Technologies group to optimize plant operating conditions to maximize profitability.

Provide engineering assistance for environmental permitting requirements.

Review and make recommendations to keep the plants operating envelope current.

Manage capital and expense projects utilizing the Capital Value Process.

Coordinate field construction and establish a schedule of activities.

Coordinate activities with the other operations engineers to assure full value across the entire unit is realized.

Spend time in the control room and listen to the ideas of technicians and shift managers to gather ideas for safety and cost improvement.

Obtain process and operating data to perform calculations for feasibility studies, process studies, and evaluations. Investigate assignments and establish plans with objectives and a schedule.

Around the clock support during plant outages including confined space work.

Skills & Knowledge Required

Strong written and oral communication skills

Strong computational and data analysis skills

Strong IT skills with process modeling and process simulation software

Strong problem solving skills

Good negotiator and influencer

Good team leader and motivator

Solid understanding of financial calculations and their impact on the bottom line

Willingly takes the lead when challenges occur

Builds networks to enhance effectiveness and share knowledge

Change agent, looks for ways to do things better, faster, more efficiently.

Job Description


Identify and implement improvements to processes and procedures that will increase capacity, reduce cost; improve safety and quality of global supply chain manufacturing processes. Troubleshoot existing processes to improve on stream time and operating efficiency. Work in a team environment with operations and other members of the Unit Operating Teams. Identify opportunities to improve mechanical and instrumentation reliability. Utilize process improvement methodologies including Lean Six Sigma to increase Afton's profits. Responsibilities




* Track operating performance and product quality of production units. Identify causes of departure from standard and initiate corrective actions
* Troubleshoot existing processes and initiate corrective actions to improve on stream time and operating efficiency.
* Identify and implement improvements to processes and procedures that will increase capacity, reduce production cost, improve safety and quality of chemical manufacturing processes.
* Provide technical coverage for plant trials and startups.
* Write operating procedures and provide training for chemical operators.
* Propose changes in programming logic that will lead to improved process safety, quality, or production efficiency.
* Develop in depth expertise on process equipment used at the plants such as reactors, agitators, heat exchangers, pumps, and filters.
* Write and obtain approvals for MCR's (Manufacturing Change Requests) and PCF's (Process Change Forms) in support of process improvements.
* Lead or be a member of PPA (potential problem analysis), JSA (job safety analysis) and PHAs (process hazard analysis teams.
* Develop PFDs, P&IDs, mass and energy balances for modified processes.
* Develop project scopes for small capital projects.
* Specify new process equipment including updating/revising equipment specification sheets. Work with equipment vendors and operations to aide in selection.
* Perform data and statistical analysis to make sound processing decisions.
* Provide relief coverage for supervision in production units.
* Other duties as assigned.

EDUCATION & EXPERIENCE
* BS degree in Chemical Engineering
* 2 - 5 years of relevant experience, preferably 5+

Responsibilities

* Plans, supports, and implements total quality programs
* Designs, specifies, and installs quality control sampling systems, testing mechanisms, and equipment
* Formulates and/or assists in formulating quality control policies and procedures and development of quality standards
* Responsible for PPAP and IATF duties
*Serves as a liaison and coordinates activity of internal and external resources
* Investigates and solves manufacturing-related problems in assigned area using formal problem-solving tools
* Analyzes and develops suppliers' products to obtain maximum productivity and reviews performance in operation and provides suggestions for improvement
* Champions continuous improvement efforts
* Researches, recommends, implements, and administers new and/or existing quality assurance processes
* Engages in comparative and competitive analysis to ensure utilization of most appropriate and beneficial techniques in each situation respectively

Accountable for the reliability of rotating equipment; requiring knowledge of best-in-class practices around operation and maintenance of rotating equipment. You will utilize a solid ability to troubleshoot mechanical rotating equipment by applying root cause failure analysis. Skills include troubleshooting motors, pumps, compressors, and gearboxes utilizing vibration signatures, oil analysis, and motor current signatures.

JOB RESPONSIBILITIES








* Troubleshoot screw and centrifugal compressor problems utilizing existing process conditions.
* Oversee and direct the rotating equipment/vibration monitoring program.
* Review rotating equipment recommendations and set priorities for completion of recommendations.
* Ensure complete and accurate rotating equipment repair documentation.
* Participate in all the appropriate project reviews that impact the reliability and rotating equipment integrity of the plant.
* Implement projects to improve mechanical reliability, reduce costs, improve safety and solve environmental issues.
* Provide technical support to project engineering. Have some crossover responsibilities on the stationary equipment reliability.
* Work with vendors concerning equipment issues, technology issues, failure problems, and quotes on equipment used in some projects.
* Demonstrate strong safety leadership in daily work and through:

* Coordination with maintenance supervisors to develop and implement preventive and predictive maintenance programs on existing equipment (fixed equipment, pumps, safety devices, etc.) based on manufacturer's recommendation or best engineering practices
* Lead or participate as needed in Process Hazard Analysis, Layers of Protection Analysis (LOPA), or other risk assessments
* Write and support the Management of Change process through PHA and PSSR Evaluations
* Lead/participate in incident investigations to identify root causes and corrective recommendations to prevent reoccurrence

REQUIREMENTS







* Degree in Engineering; Mechanical Engineering preferred
* Experience in plant maintenance, of this, 5 years focused on rotating equipment troubleshooting, vibration monitoring, etc.
* Extensive experience with screw and centrifugal compressors and pumps
* In-depth knowledge of compressors, steam turbines and gearboxes
* Experience in providing training to rotating equipment mechanics and operators preferred

Technical Skills







* Familiarity with vibration signature and oil analysis; pump design fundamentals and sizing; and mechanical details of rotating equipment and seal plans
* Basic knowledge of relevant instrumentation and applications on rotating equipment
* Root-cause analysis and reliability fundamentals
* Familiarity with Bad Actor programs and Criticality analysis
* General understanding of reactors, exchangers, boilers, tanks, etc.
* Experience with SAP, Microsoft Office software, Word, Excel, Access, PowerPoint, Microsoft Project, etc.

1 position will report to Engineering Manager along with other degreed engineers, Design Manager, and I&E Manager. The first responsibility is executing projects ($50k to $10M) within the budget and schedule according to internal expectations. The second responsibility is the process engineering related to capital projects and continuous plant improvements.

Actual day-to-day duties will depend on capital project workload, process improvement requirements, and the skills and knowledge of the employees and others in the engineering group.

RESPONSIBILITIES:







* Project management including development of bid packages, review of drawings, oversight of contractors, budgeting, and scheduling.
* Development of individual project requirements (Scope of Work) based on input for local and corporate requirements, potential cost savings, increased uptime, etc.
* Development of material and energy balances, sizing and specification of equipment, piping, and valves as related to existing processes and new projects.
* Leadership of commissioning activities related to new installations.
* Teamwork with local production and maintenance personnel in the troubleshooting of technical issues of existing processes, often with some insight necessary from other locations.

These experiences are deemed to be beneficial in order of importance, but not necessarily all essential:







* Management of multiple projects.
* Engineering of processes handling solids
* Engineering of process utilities
* Construction oversight and confirmation
* Plant commissioning
* Use of relevant codes and standards (RAGAGEPs).
* Knowledge of instrumentation
* Engineering of processes handling flammable and combustible liquids
* Knowledge of PSM, environmental and other regulatory requirements
* Interaction with maintenance personnel
* Yokogawa VP or other control system troubleshooting, and programming
* French language
* SAP - Project Systems

Requirements







* Degree in Chemical or Mechanical Engineering
* Relevant capital project experience in the chemical process industry, especially with solids handling experience.

Responsibilities include:











* Developing process controls execution strategies in conjunction with overall project development team

* Participate in P&ID development and Operability and Hazard Reviews
* Create, check or approve specifications of process control equipment including control valves, relief valves, flow measurement devices, process instrumentation, analytical systems, and DCS, PLC, and SCADA systems
* Identify and manage process controls technical risk items
* Manage a teams schedule, budget, and quality which can include a local in-house design team, geographically remote engineering and design center, or an outside engineering EPC
* Review SIL assessments and author SIL verification
* Participate in Control System Design reviews
* Responsible for Cyber Security aspects of their scope of supply
* Participate in Factory Acceptance Testing of Process Automation equipment (DCS, Analyzers, PDC)
* Production and maintenance of instrument summaries
* Participate in plant commissioning, BPCS / SIS validations, SAT, and startups.
* Manage deliverables and report to project management about progress.
* May participate in preparing cost estimates for valves, instrumentation, analytical equipment, DCS equipment, SIS equipment and labor

Requirements:
* Bachelor's degree in Chemical, Mechanical, or Electrical Engineering
* At least 8 years of applicable work experience
* Ability to demonstrate a deep understanding of the design and implementation of control and instrumentation systems for process plants; provide and discuss examples
* Experience developing BPCS / SIS architectures, control applications, and hardware specifications using Siemens PCS7; additional experience with other controls platforms is a plus
* Must be able to demonstrate technical competence, leadership skills, communicate effectively
* Instrumentation specification authoring in Smart-Plant Instrumentation toolset
* Must be able to lead and direct the work of junior engineers assigned to projects
* Must be a strong team player with a willingness to accept responsibility
* Must be able to problem-solve and utilize critical thinking to develop solutions to challenges
* Self-starter with excellent interpersonal and communication skills enabling you to work well within a multi-disciplinary design team located in multiple geographies and to liaise directly with suppliers and clients
* Travel is required, both domestic and international
* Travel will include trips to plant sites, equipment fabricators, outside engineering firms, and customer locations (estimated at 30%)

General Responsibilities:
The Mechanical Reliability Engineer position has primary responsibility for providing programs and projects to improve equipment reliability, developing maintenance procedures to reduce maintenance cost, addressing emergent equipment issues, and fostering continuous improvement.

Specific Duties:

* Review and upgrade existing preventive maintenance works orders. With the focus on improving overall equipment uptime and reliability.
* Work closely with Operations, Engineering, and Maintenance Supervision towards equipment reliability
* Develop engineering solutions to maintenance problems, including ways of reducing or eliminating the need for maintenance through equipment replacement or improvement work.
* Provide technical support to maintenance personnel on equipment repairs, troubleshooting problems and equipment reliability issues.
* Assist in evaluation of existing and new equipment design and installation on aspect of safety and environmental issues.
* Assist with writing Maintenance Procedures
* Participate in and/or lead incident investigations, utilizing root cause failure analysis techniques and risk-based assessment skills.

Qualification Requirements:
Degree in mechanical or chemical engineering.
Experience in the petrochemical, refining or power industry
A preferable background in rotating equipment is preferred.
Experience with mechanical integrity programs or process control
Strong computer and analytical skills.

Job Title - Sr. Project Manager - Analyzers

Our client in Houston, TX is looking for hardworking, motivated talent to join their team. This company is a leading provider of analyzer and CEMS solutions in the Houston area! Don't wait… apply today!

What's in it for you?


* $120,000-165,000/yr
* Onsite - N. Houston area
* Full Time/Permanent Opportunity
* Work on fast paced projects working with a technically savvy team
* Brownfield revamps, upgrades

Job Description


*

Required Job Experience:
7-10 years in successfully managing process and environmental analyzer systems engineering and design projects. Project types typically include brownfield revamp and upgrade projects in refining and chemical plants ranging in value from $50,000 to 2,000,000.
Education:
BS in Engineering discipline or equivalent work experience in the project field.
Key Attributes:
The successful candidate will demonstrate a high degree of technical knowledge and competency in leading teams of engineers and designers to quality, budget, and schedule objectives. Must demonstrate the ability to work to a high standard of professionalism, provide leadership a guidance within a team environment.
Must have the ability to collaboratively work with client personnel to achieve successful results in all areas of the project.

Are you Interested?

Share this job with friends and family and earn dollars with every successful hire.

CQV Engineer

Our client in Raleigh, NC is looking for hardworking, motivated talent to join their team. Don't wait… apply today!

Job Description


* Support start-up, commissioning, qualification, and validation for cGMP facility, including equipment and utilities.
* Review and author documentation
* 3 years of experience required of CQV within pharma manufacturing
* CQV Upstream Equipment and Downstream Equipment
* CSV & CIP Experience needed
* Knowledge of CQV Coordination Specialist
* Bachelor's degree is required.

Are you Interested?

Share this job with friends and family and earn dollars with every successful hire.

Electrical Designer



Your Electrical Design skills are needed just about anywhere. But is it where you want to go? Imagine working for one of the nation's most respected companies. Making a strategic contribution. Receiving the rewards and recognition you deserve. Whether you are pursuing a contract or permanent placement, Manpower knows how and where to get you where you want to go.



In this Electrical Designer position, you will be responsible producing complete design packages including detailed schematics, cable diagrams, Bill of Materials, and safety circuits that meet the design requirements.



Are you interested? The ideal Electrical Designer candidate will possess the following experience:

* 3-5 years' experience in systems/controls development and integration of factory automation equipment
* Must have prior experience with E-Plan
* Prior experience with PLC's, panel view's and related components is advantageous



You can see it. More challenging work. A more interesting work environment. The opportunity to use your finely honed skills to make a real difference. And to collect pay that reflects your talent and expertise. If this is what you see for yourself, you need talk to Manpower.



Through our reach and resources, Manpower brings you career options you couldn't find on your own. We're experts at placing each of our candidates into his/her "dream job" - one perfectly matched to skills, ambition and lifestyle.



We've got the right opportunity. Tell us why you're the right person. Apply today!

Job Summary
The role is responsible for the operational management and effective daily leadership and administration of the engineering/electrical teams with the objectives of safely, efficiently, and effectively operating machinery and systems in a cost-effective manner. The Chief Engineer must ensure the highest level of professionalism, while meeting the clients' needs, and a commitment to achieving the goal of 100% uptime throughout the engineering team. Responsible for protecting and improving the value of the client's assets and ensuring that building engineering systems continue to perform their intended function. The Chief Engineer will implement and manage the reliability-based maintenance function. The incumbent also executes equipment inspection and monitoring programs; defines and implements maintenance best practices to improve overall mechanical equipment uptime; and continuously evaluates current maintenance, operations and reliability methods and implements changes to enhance effectiveness at increasing value-maximizing performance.

Responsibilities

* Supervises and directs maintenance staff and monitors performance of their assigned responsibilities. Performs and/or directs the performance of all maintenance departmental service requests, ensuring that the work performed in these areas is accomplished efficiently, neatly and with a minimum amount of disruption and inconvenience.
* Checks malfunctioning equipment and ascertains corrective action required to restore to satisfactory operating condition. Manages departmental staff, including selection, scheduling and job assignments; counseling, appraisals and recognition; recommending salary, promotional, disciplinary, termination and other personnel actions.
* The Hospital Plant Operations Manager will work with the client to schedule equipment to be taken off line so that preventative maintenance can be performed, monitors operation of electrical and mechanical equipment supporting the facility and facility's critical operations.
* Requires the ability to analyze the operation of various site infrastructure systems, determine the root cause of any problem / malfunctions and take corrective action as required. Provides training and support and aims to expand the capabilities of operations staff.
* Gives hands on instruction in basic maintenance, safety and troubleshooting procedures.
* This position will demonstrate the proper use and care of tools and will instill a high level of professionalism and client service. This position must maintain compliance with all applicable regulatory surveys, Joint Commission and other client based audits that are applicable to their assigned facility or facilities.

Essential Functions

* Participate in the Environment of Care, Emergency Management, Life Safety Code and fulfilling the role of Safety Officer.
* Provides training and support and aims to expand the capabilities of operations staff. Gives hands ­on instruction in basic maintenance, safety and troubleshooting procedures.
* Demonstrates the proper use and care of tools. Instills a high level of professionalism and
* Directs the performance of contracted maintenance Financial Management:

Senior level engineering position in the Electrical Engineering group designing industrial power systems for industrial gas plants. The Electrical Engineering group is responsible for specifying, purchasing, and commissioning the electrical distribution equipment and large motors associated with cryogenic, hydrogen, cogeneration, and process gas plants.

RESPONSIBILITIES:
1. Development of electrical single line diagrams and overall plant electrical distribution systems.
2. Coordination with utility and/or customer to develop required power for operating plants.
3. Specifying and purchasing key electrical equipment such as medium and low voltage switchgear and motor control centers, transformers, VFD's, UPS systems, DC systems, etc. Responsibilities include writing purchase specifications, evaluating quotations, performing technical bid evaluations, vendor document review, and factory acceptance testing.
4. Specifying large induction and synchronous motors and starting systems including reduced voltage autotransformers, reactor start, electronic soft-start/VFD/LCI, etc.
5. Specifying and integrating gas turbine and steam turbine generators for co-generation within process plants.
6. Performing electrical system studies including short circuit, load flow, transient motor start, protection relay coordination, and arc flash, and creating appropriate protective device settings.
7. Provide start-up and commissioning support for electrical distribution equipment and motors.

QUALIFICATION/SKILLS:




* BS Degree in Electrical Engineering with a minimum of 10 years' experience in design of industrial electrical power systems.
* Professional Engineer license is required. CA license a plus.
* Computer literate and experienced in the use of SKM Power Tools, MS Word, and MS Excel.

A medical device client of ours is seeking a Senior Process Development Engineer to be responsible for supporting new and existing products within interventional urology. This position will be the process development technical representative of their respective project teams. Training other process development staff, as well as mentoring other engineers on the team will be a part of this role. Candidates with active implantable experience are highly sought after, however client will consider experience in other medical device disciplines as well. This is a direct hire role located in Minneapolis, MN.


Major Areas of Accountability:


* Responsible for the following project inputs:

* Feasibility builds, documentation, and testing,
* Equipment selection,
* Process development and documentation,
* Device Verification samples and testing,
* Operator training,
* Process Failure Mode Effects Analysis,
* Clinical builds,
* Process Validation

* Involvement in the design, development, and validation requirements of projects, including:

* Product design and specification creation, including mechanical and electrical components, assemblies, and packaging,
* Materials sourcing and device prototyping,
* Manufacturing transfer and support of existing product lines as applicable.


Basic Qualifications:


* BS in Engineering (Mechanical preferred)
* 5+ years experience in medical devices (active implantable), not all required to be in process development
* Solid understanding of engineering concepts and principles
* Able to develop validation protocols and synthesize data to write test reports based on observed data, relevant test standards and general engineering knowledge
* Familiarity with statistical analyses; DOE and Gage R&R execution
* Familiarity with FDA, ISO and EN Standards as they apply to medical devices
* Good understanding of Quality Management Systems and standard operating procedures
* Ability to travel up to 10%