• Valid City, State or Zip Code: Morgantown
    Job Type : Permanent
    Date: Monday, 04 October 2021
    General Description: The Lead Project Engineer is responsible for designing and specifying existing and new product/plant/process projects including technical calculations, flow diagrams, mass and energy balances, and equipment specifications in accordance with company standards and legal requirements. The Lead Project Engineer is an experienced Engineer who implements designs and projects independently with little oversight. This role requires delivery of value over an extended period of time, and the individual is recognized by peers for a high level of knowledge and contribution.

    Safety/Health/Environment:


    * It is required of the Lead Project Engineer to be responsible for their own safety and the safety of others at all times.
    * Adhere to all applicable EH&S regulations and Engineering Standards. Participate as needed in safety audits, incident investigations, PHA/HAZOP studies.
    * Ensure company and statutory EHS standards are maintained, including Responsible Care.
    * To participate, as required, in safety audits/inspections, event investigations, Six Sigma teams, project management teams, and project briefings.
    * Complete all assigned and required safety training in a timely manner.
    * To maintain, develop, and apply standards that ensure compliance with legislation, Responsible Care, and in fulfillment with the Shareholder's expectations.
    * Fulfill TSCA responsibilities as defined in the document titled "TSCA Compliance Management System Manual 2- TCMS Standard Operation Procedures by Job Title.

    Project Engineering:


    * Lead significant engineering projects.
    * Conceptual scope definitions, risk assessments, design and economic evaluation of processes or facility modifications.
    * Work with plant stakeholders to develop project scopes while including the appropriate engineering standards pertinent to the projects.
    * Direct all aspects of project execution to ensure effective, timely and lowest overall cost of capital projects.
    * Coordinate both in-house resources and external contractors to achieve project objectives.
    * Provide all required project cost tracking and forecasting to realistically reflect outcomes for assigned projects.
    * Maintain the risk profile on the project to acceptable levels, as defined by the project stakeholders and executive leadership expectations.
    * Work with external engineering companies to complete the project engineering design and plant installation.
    * Responsible for project installation, commissioning and process trouble-shooting.
    * Provide oversight and management of contractors during project construction activities.
    * Maintain relationships with equipment suppliers and specialists.

    Process Engineering:


    * Conceptual design and economic evaluation of processes or modifications to aid in the smooth transition of projects from conceptual design to plant operations,
    * by identifying plant/process requirements.
    * Development of equipment design criteria and performance specifications.
    * Providing heat and material balances for processes or process modifications, as needed.
    * Perform detailed engineering review of Process Manual.
  • Valid City, State or Zip Code: Schenectady
    Job Type : Permanent
    Date: Monday, 04 October 2021
    General Description: The Principal Process Engineer is responsible for designing and specifying existing and new product/plant/process projects including calculations, flow diagrams, mass and energy balances, and equipment specifications in accordance with company standards and legal requirements. The Principal Process Engineer is an experienced and seasoned Process Engineer who runs programs/projects independently with little or no oversight. This role requires outstanding performance over a long period of time, and he/she is recognized by peers for a high level of knowledge and significant contribution.

    Safety/Health/Environment:



    * It is required of the Principal Process Engineer to be responsible for his/her's own safety and the safety of others at all times.
    * Adhere to all applicable EH&S regulations and Engineering Standards. Participate as needed in safety audits, incident investigations, PHA/HAZOP studies. Ensure company and statutory EHS standards are maintained, including Responsible Care.
    * To participate, as required, in safety audits/inspections, event investigations, PHA/HAZOP studies, Six Sigma teams, project management teams, and project briefings. Ensure company and statutory EHS standards are maintained including Responsible Care.
    * Complete all assigned and required safety training in a timely manner.
    * To maintain, develop, and apply standards that ensure compliance with legislation, Responsible Care, and in fulfillment with the Shareholder's expectations.

    Process Development:



    * Conceptual design and economic evaluation of processes or modifications and, with R&D personnel, to aid the smooth transition of projects from the laboratory to pilot plant to production, by identifying plant/process requirements, progression and commissioning of plant/process modifications.
    * Development of equipment performance specifications.
    * Providing heat and material balances for processes or process modifications.
    * Pilot Plant and/or equipment testing of a process or process step
    * Equipment manufacturers/suppliers and Engineering firms, technical evaluation
    * Contract manufacturing evaluations.
    * Detailed engineering review and Process Manual writing and to participate in various engineering aspects of capital projects.
    * Start-up supervision of a new process or modification at pilot or commercial scale.
    * With other specialist engineers and managers in the U.S. and other SI Group sites, to aid in the design, implementation, and improvement of new and existing projects and processes.
    * Fulfill TSCA responsibilities as defined in the document titled "TSCA Compliance Management System Manual 2- TCMS Standard Operation Procedures by Job Title.
    * Maintain relationships with plant and equipment suppliers, specialists, and consultants including various university faculty, and contactors of various disciplines.
    * Lead significant engineering projects.
    * Provide support, as needed, in all areas to the Sr. Director Engineering and Capital Planning.
  • Valid City, State or Zip Code: Baton Rouge
    Job Type : Permanent
    Date: Monday, 04 October 2021
    General Description: The Lead Project Engineer is responsible for designing and specifying existing and new product/plant/process projects including technical calculations, flow diagrams, mass and energy balances, and equipment specifications in accordance with company standards and legal requirements. The Lead Project Engineer is an experienced Engineer who implements designs and projects independently with little oversight. This role requires delivery of value over an extended period of time, and the individual is recognized by peers for a high level of knowledge and contribution.

    Safety/Health/Environment:


    * It is required of the Lead Project Engineer to be responsible for their own safety and the safety of others at all times.
    * Adhere to all applicable EH&S regulations and Engineering Standards. Participate as needed in safety audits, incident investigations, PHA/HAZOP studies.
    * Ensure company and statutory EHS standards are maintained, including Responsible Care.
    * To participate, as required, in safety audits/inspections, event investigations, Six Sigma teams, project management teams, and project briefings.
    * Complete all assigned and required safety training in a timely manner.
    * To maintain, develop, and apply standards that ensure compliance with legislation, Responsible Care, and in fulfillment with the Shareholder's expectations.
    * Fulfill TSCA responsibilities as defined in the document titled "TSCA Compliance Management System Manual 2- TCMS Standard Operation Procedures by Job Title.

    Project Engineering:


    * Lead significant engineering projects.
    * Conceptual scope definitions, risk assessments, design and economic evaluation of processes or facility modifications.
    * Work with plant stakeholders to develop project scopes while including the appropriate engineering standards pertinent to the projects.
    * Direct all aspects of project execution to ensure effective, timely and lowest overall cost of capital projects.
    * Coordinate both in-house resources and external contractors to achieve project objectives.
    * Provide all required project cost tracking and forecasting to realistically reflect outcomes for assigned projects.
    * Maintain the risk profile on the project to acceptable levels, as defined by the project stakeholders and executive leadership expectations.
    * Work with external engineering companies to complete the project engineering design and plant installation.
    * Responsible for project installation, commissioning and process trouble-shooting.
    * Provide oversight and management of contractors during project construction activities.
    * Maintain relationships with equipment suppliers and specialists.

    Process Engineering:


    * Conceptual design and economic evaluation of processes or modifications to aid in the smooth transition of projects from conceptual design to plant operations,
    * by identifying plant/process requirements.
    * Development of equipment design criteria and performance specifications.
    * Providing heat and material balances for processes or process modifications, as needed.
    * Perform detailed engineering review of Process Manual.

    Job Requirements


    * Degree in Chemical Engineering. Other degrees may be acceptable with appropriate experience
    * Experience in the chemical process industry. Bulk of experience must be in a combination of process design, project management, and plant construction
  • Valid City, State or Zip Code: Fridley
    Job Type : Permanent
    Date: Sunday, 03 October 2021
    Senior Construction Project Manager | $90-$120k Base | Greater Twin Cities

    Responsible to manage multiple projects of varying sizes and complexities from start to finish, including project design, quality control, job scheduling, problem resolution, job completion, coordination, communication, client satisfaction activities and other related duties. This position manages a team of project management employees and also has responsibility for business development, project budgets, projections and contracts, job solicitation and project negotiations.

    Essential Functions

    Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    1 Directs all phases and activities of each project to achieve high quality and productivity in the work performed. This includes bidding, budgeting, monitoring projections and establishing goals and standards of performance.
    2 Plans, implements, independently manages and maintains all project activities to optimize efficiency of labor, materials, supplies, equipment and tools.
    3 Accountable for all activities from start to finish to achieve the financial goals of the project.
    4 Ensures on-time and on-budget project completion, especially of larger and more complicated projects, through management of project team.
    5 Procures materials and negotiates with vendors and distributors on availability and pricing of materials, completion of quotes and other necessary procedure details.
    6 Holds job start up meetings with field operations leaders and others to transfer documentation, schedules and other information. Regularly attends project update meetings to stay current on job scope, schedules, administrative needs and market conditions.
    7 Provides day-to-day direction to project foreman and/or superintendent as needed to monitor productivity goals and build teamwork.
    8 Provides ongoing quality reviews and project communication with owners, contractors, designers, subcontractors, engineers, architects, field staff and other customers or stakeholders, addressing and resolving issues when needed.
    9 Develops leadership potential through appropriate task assignments and career growth opportunities. Establishes and nurtures a positive teamwork environment.
    10 Builds effective relationships with customers, foremen, project team, specialty contractors, vendors, suppliers, user groups and others that reflect and support the Company's core values and meet or exceed the customer's expectations.
    11 Provides flexible degree of involvement in project execution and/or consultation on project execution depending on needs of project and Project Manager.



    Required Education, Experience and Skill

    -Bachelor's Degree in project management, business administration, construction engineering/management or related field.

    -5+ years in Project Management - construction

    -Electrical experience REQUIRED!!
  • Valid City, State or Zip Code: Casper
    Job Type : Permanent
    Date: Thursday, 30 September 2021
    Manpower Casper has immediate openings for experienced Field Service Technician AND Shop Service Technicians. The Field/Shop Service Technician will diagnose, repair and maintain all necessary customer equipment, including but not limited to: bucket trucks, diggers, truck cranes, boom trucks. Previous experience is REQUIRED.

    ESSENTIAL JOB FUNCTIONS
    * Utilize great technical skill to perform hydraulic and electronic tests, also using J-Pro computer programming for a variety diagnostic testing and parameter settings.
    * Ability to diagnose mechanical, electrical, and hydraulic malfunctions.
    * Analyze and utilize schematic diagrams and technical manuals.
    * Keeps abreast of all changes in various models of equipment sold and serviced by the distributors
    * Actively supports safety policy, goals, and objectives plus uses sound environmental practices.
    * Able to manage and be held accountable for all truck related inventory
    * RESPONSIBLE for all company owned tools, equipment and vehicles in his care or possession treating all as if they were his own!
    * Must be able to work as an individual contributor as well as with other technician's on assigned jobs and tasks.

    Pay is DOE and RANGES from $24.00-$40.00 per hour. Must have valid Drivers License and a CLEAN motor vehicle record

    Interested candidates may call or text the office at 307-362-1941 option 2, apply here, or send your resume to the address below.
  • Valid City, State or Zip Code: Savage
    Job Type : Permanent
    Date: Thursday, 30 September 2021
    Our client is seeking a Lead Mechanical Test Engineer to be responsible for planning, data collection/analysis, validation and reporting of their assigned project initiatives. The person in this role will be expected to follow proper procedures; perform accurate tests and compile and present results. This position requires a hands-on, team-based approach and will report to the Engineering Lab Manager. This position will have the opportunity lead and mentor others within the test group. This is a direct hire opening located in Savage, MN.


    PRIMARY RESPONSIBILITIES


    * Run DFMEA's for products to be tested in the lab.
    * Write and complete validation plans for products tested in the lab.
    * Design new test stands to test products in the lab.
    * Keep project managers up to date on testing progress.
    * Run field trials for products under test.

    KNOWLEDGE AND SKILL REQUIREMENTS


    * Bachelor's degree in engineering, electro-mechanical, fluid power, or equivalent work experience.
    * Has working knowledge of mechanical, electrical and fluid handling equipment.
    * 7 years of experience in a technical product development testing role.
    * Experience with new product introduction.
    * Experience in interfacing with customers during field trial processes.
    * Certified in running DFMEA's
    * Experience writing validation plan's.
    * An understanding of and experience working with the set-up, operation, and troubleshooting of test and measurement equipment (i.e. pressure transducers, analysis software, flow meters, pumps, Venturi). This also includes basic wiring practices, tubing and fitting connections, and fabrication in support of test set-ups.
    * Has experience working with both high and low voltage.
    * Ability to understand engineering drawings, follow test protocols, and work instructions.
  • Valid City, State or Zip Code: Geismar
    Job Type : Permanent
    Date: Thursday, 30 September 2021
    Oversees and leads the maintenance execution teams at the USA LLC production facilities in a cost-effective manner, ensuring the safety of personnel, protection of the environment and the reliability and availability of plant to achieve production targets.

    Provides direction and leadership to the Static Equipment, Rotating Equipment, I&E and Services teams in the execution of work, implementation and monitoring of best practices and company standards, maximizing the efficiency and effectiveness of all maintenance resources during normal operation, planned turnarounds, unplanned outages and major maintenance projects.


    POSITION RESPONSIBILITIES

    * Effectively manages the budget and the execution schedule of the Maintenance Team.
    * Effectively executes capital project work that is assigned to the Maintenance Department.
    * Ensures all work is completed safely and cost effectively to achieve the required quality and schedule.
    * Leads the team during shutdown and turnaround work within the plant area.
    * Manages unplanned breakdowns, ensuring appropriate planning and controls are incorporated into each event.
    * Manages mechanical maintenance contracts and contractor relationships.
    * Manages the facilities associated with the Maintenance group.
    * Responds to Operations priorities to minimize production loss.
    * Ensures that all maintenance work is planned and scheduled according to the site prioritization system.
    * Ensures there is effective integration with the other Supervisors and other groups of the Maintenance Department.
    * In conjunction with the Reliability and Maintenance Engineers, develops and optimizes the maintenance program to meet plant availability requirements.
    * Ensure soft craft contractors are meeting needs and maintain effective control over scaffold errection/dismantling.
    * Manages the assigned budget ensuring appropriate financial controls.
    * Ensures that all plant maintenance is implemented in accordance with standards and Best Practices and are in compliance with all relevant USA legislation.
    * Ensures that all Plant Changes are implemented in accordance with the applicable Management of Change procedures.
    * Manages the turnaround job list and turnaround execution.
    * Works with key stake holders to ensure that turnaround requirements, e.g., statutory and capital, are captured and included in the turnaround plan.



    * Prefer 10 years' experience working in a Maintenance Supervisory role, preferably within a Manufacturing environment.
    * Experience with Predictive and Preventative Maintenance Programs, including Root Cause Analysis.
    * Expert understanding of maintenance planning and scheduling systems and processes.
    * Experience with ISO 9000.
    * Experienced in Managing Projects.
    * Experience with implementation of Strategy.
  • Valid City, State or Zip Code: Maple Grove
    Job Type : Permanent
    Date: Thursday, 30 September 2021
    A client of ours is seeking a Senior Product Development Engineer with MEDICAL DEVICE experience to join their team and work along the development process anywhere from concept and ideation through commercialization. Targeting entry to mid level medical device engineers. This is a direct hire opening located in Maple Grove, MN.

    Duties and Responsibilities


    * Leads development of concepts, prototypes, processes, and products from initial design to market release
    * Assists in writing proposals for existing clients to achieve new deliverables within an existing phase or as a part of ongoing efforts
    * Designs and implements new methodologies, materials, machines, processes or products to bring concept to market, including essential product and process documentation
    * Maintains detailed documentation throughout all phases of research and development
    * Ability to generate and execute protocols and reports as needed to support validation activities, including Design Verification, IQ, OQ, PQ


    Position Qualifications:


    * Bachelor's degree in Mechanical, or Biomedical Engineering is preferred
    * Seeking candidates 5+ years of experience within medical device design and development
    * Familiarity with FDA QSR and ISO 13485 medical device regulations
    * SolidWorks 3D CAD proficiency
    * Familiarity with design for catheters and extrusions is highly preferred but not required
  • Valid City, State or Zip Code: Williamsport
    Job Type : Permanent
    Date: Wednesday, 29 September 2021
    The primary result expected from the Continuous Improvement Engineer is to assist in the development and implementation of the continuous improvement vision for the organization by coaching, mentoring, and leading teams to establish a culture of continuous improvement across the organization; ensuring adherence to the principles of lean manufacturing while planning & facilitating strategic plans across plant locations.

    Typical tasks for this position include (but are not limited to) the following:


    * Assist in the planning and implementation of continuous improvement strategies to achieve overarching global business strategy (MAP)
    * Work with plant management to gather baseline data on Yield, OEE, Quality, Losses, Waste, etc. and provide relevant tools that clearly identify top losses (Pareto analysis, etc.)
    * Champions loss analysis improvement plan development, plan execution leadership and results tracking.
    * Collaborate with plant leadership to develop processes that monitor performance hour to hour, shift to shift, day to day and week to week.
    * Coordinate continuous improvement events/activities to improve performance, eliminate wastes and losses (i.e., kaizen/continuous improvement, value stream mapping, statistical problem solving, etc.) as required, including the planning of events and resources, training and leading teams, achieving event objectives, and documenting improvements.
    * Provide leadership in continuous improvement efforts to improve reliability, ease of use & maintenance, minimize changeover times, and eradicate production losses.
    * Coach & mentor operations' team, including staff, supervisors, and crew leads on continuous improvement methods and processes to establish a culture where tools and methods are utilized in a standard way to deliver improvements.
    * Develop continuous improvement leadership within local operations' team to build their capability for leading and executing their own continuous improvement activities within the plant according to the business strategy.

    * Implements initiatives that support the progress for improvement of Safety, Quality, Cost, Delivery and Engagement.
    * Maintain positive work relationships with members of other teams to communicate effectively, and to ensure compliance with cross-team responsibilities.



    Requirements:


    * Bachelor's degree in a relevant Engineering discipline or equivalent (Industrial or Mechanical).
    * 3+ years of progressive experience leading continuous improvement efforts in a manufacturing setting.
    * Demonstrated ability to develop and use lean tools to drive organization effectiveness; ability to coach & train others to perform the same.
    * Strong ability to successfully instruct/coach learners and to build collaborative working relationships.
    * Strong verbal and written communication skills to communicate within all levels of the operations organization.
    * Excellent organization, multi-tasking, and prioritization skills.
    * Strong computer skills in various software programs including Microsoft Word, Excel, PowerPoint, MS Project.
    * Strong interpersonal skills to interact with a diverse workforce.
  • Valid City, State or Zip Code: Williamsport
    Job Type : Permanent
    Date: Wednesday, 29 September 2021
    The primary result expected from the Continuous Improvement Engineer is to assist in the development and implementation of the continuous improvement vision for the organization by coaching, mentoring, and leading teams to establish a culture of continuous improvement across the organization; ensuring adherence to the principles of lean manufacturing while planning & facilitating strategic plans across plant locations.

    Assist in the planning and implementation of continuous improvement strategies to achieve overarching global business strategy (MAP). Work with plant management to gather baseline data on Yield, OEE, Quality, Losses, Waste, etc. and provide relevant tools that clearly identify top losses (Pareto analysis, etc.). Champions loss analysis improvement plan development, plan execution leadership and results tracking. Coordinate continuous improvement events/activities to improve performance, eliminate wastes and losses (i.e., kaizen/continuous improvement, value stream mapping, statistical problem solving, etc.) as required, including the planning of events and resources, training and leading teams, achieving event objectives, and documenting improvements. Provide leadership in continuous improvement efforts to improve reliability, ease of use & maintenance, minimize changeover times, and eradicate production losses.Coach & mentor operations' team, including staff, supervisors, and crew leads on continuous improvement methods and processes to establish a culture where tools and methods are utilized in a standard way to deliver improvements. Develop continuous improvement leadership within local operations' team to build their capability for leading and executing their own continuous improvement activities within the plant according to the business strategy.Implements initiatives that support the progress for improvement of Safety, Quality, Cost, Delivery and Engagement. Maintain positive work relationships with members of other teams to communicate effectively, and to ensure compliance with cross-team responsibilities.

    Ability to establish plant management processes for reporting metrics. Ability to understand plant financial measures and how they are generated. Ability to interpret control charts. Ability to motivate others to take action dictated by data. Communicate with Supervisors, peers, or subordinates: provide information to supervisors and co-workers in written form or in person. Perform tasks assigned using specific operating procedures, and following department specific quality control processes and procedures. Treat people with dignity and respect. Conduct all business with integrity. Adhere to Quality principles and participate in all departmental and company-wide Quality activities. Follow all safety procedures and company policies.

    Bachelor's degree in a relevant Engineering discipline or equivalent (Industrial or Mechanical). 3+ years of progressive experience leading continuous improvement efforts in a manufacturing setting. Demonstrated ability to develop and use lean tools to drive organization effectiveness; ability to coach & train others to perform the same. Strong ability to successfully instruct/coach learners and to build collaborative working relationships. Strong verbal and written communication skills to communicate within all levels of the operations organization. Excellent organization, multi-tasking, and prioritization skills. Strong computer skills in various software programs including Microsoft Word, Excel, PowerPoint, MS Project. Strong interpersonal skills to interact with a diverse workforce.
  • Valid City, State or Zip Code: Kalamazoo
    Job Type : Contract
    Date: Wednesday, 29 September 2021
    We are hiring Engineering Technicians in the Kalamazoo, MI area for day and evening shifts. Great opportunity to a recent Engineering graduate! We have all types of openings from entry-level to more experienced roles.

    Role Summary: The Engineering Technician serves as the technical SME on all Sterile Inspection lines. The Engineering Tech also oversees all Operator Care activities and changeovers on both automated and semi-automated lines. The Engineering Tech will work on special projects and assist engineering and maintenance with trouble shooting, validation, preventive maintenance, and other miscellaneous support. The Engineering Tech will also run lines and be expected to know duties and responsibilities of Line Coordinator, and Material Handler positions. The Engineering Tech will also be required to learn and be qualified in manual visual inspection performing basic, repetitive manufacturing or packaging operations.

    Responsibilities:

    * The Engineering Technician will be required to set-up, operate, change-over, maintain, and basic troubleshoot Inspection equipment used in Injectable Inspection.
    * Monitor, evaluate and adjust processes or equipment to maximize quality and efficiency, and make some minor repairs as required.
    * Completion of batch records associated documentation Work Center Performance Monitoring (WPM) and SAP entries.
    * Helping to train other Packaging Technicians, Line Coordinators and Inspection Operators. Additional responsibilities may include running the lines, coordinate startups and clearances.
    * Coordinate with maintenance to complete repairs and develop solutions to mechanical hindrances.
    * Provide support to the Vaccine Technican Assistants, Production Specialist, Leads and Plant Professionals for new equipment, and upgrades to existing equipment.
    * Effectively communicate with other line colleagues and support personnel.
    * Ensure in accordance with applicable safety guidelines, as well as appropriate processing standards, SOP's such as FDA's current Good Manufacturing Practices (cGMPs).

    Requirements:

    * successful candidate will have a HS diploma or GED with a required minimum of 4 years applicable experience or a BA/BS degree in Engineering, Chemistry, Physical/Biological Sciences, Business, Integrated Supply Management, or related applicable discipline that will enable the team to meet its mission
    * Language Skills: Good oral and written communication skills
    * Mathematical Skills: Ability to calculate percentages as well as multiplication and division
    * Reasoning Ability: Ability to analyze and troubleshoot automated equipment and processes
    * Physical Demands: Repetitive bending, lifting, and twisting as well as standing for extended periods of time.
    * Work Environment: Colleague is frequently exposed to moving mechanical parts. The light level in the work environment is lowered to accommodate inspection processes. Use eye protection is required.
  • Valid City, State or Zip Code: Houston
    Job Type : Permanent
    Date: Wednesday, 29 September 2021
    Mobile Maintenance Technician

    Job Description

    Maintain a positive attitude while working in a dynamic team environment
    Dependability is a MUST
    Ability and willingness to perform physically challenging tasks for extended periods of time
    Learn and follow established procedures/ directions for assembly
    Excellent aptitude in various hand tools and power tools
    Very good physical strength and stamina with the ability to bend, kneel, squat, stand, and lift objects over 75lbs.
    Able to work long shifts (overtime required)
    Comfortable working from ladders and in tight spaces
    use basic tools to modify components if necessary
    Good hand eye coordination
    Strong attention to detail
    Ability to work easily and skillfully with hands
    Experience requires plumbing and light electrical with general handyman type skills
    General Knowledge of valves, pumps, solenoids, relays and other mechanical components(a plus)

    Forklift and rigging experience(a plus)
    Must be able to work in a fast paced environment in order to meet deadlines

    Skills:

    Electrical troubleshooting Electrical testing, Fuses, relays, etc. Print reading Use of hand tools Welding Past work with production equipment
    Replacing electrical motors & drives Replacing gearbox's Repairing pumps Repairing conveyors, chain and rollers.
    Fork truck experience and Some rigging.

    Knowledge:
    Electrical Safety Mechanical Safety Lockout Tagout procedures Pneumatic systems Hydraulic systems Experience with PLC helpful

    Essential Functions:
    Performs routine and preventive maintenance for ensuring the ongoing functioning of facilities.
    Repairs equipment and systems for the purpose of ensuring a safe working condition.
    The ability to safely work on 480-volt control panels and 277-volt lighting circuits. Includes diagnosis, repair and installation of all wash equipment and variable frequency drives.

    Use of controls, 24v AC/DC through 110v AC. Working knowledge of multiple
    Works is various areas, inside and outside, in a loud environment due to car wash equipment. Job requires person to be in constant movement. Will be heavy lifting (0-60 lbs.), bending, reaching and stooping

    MUST HAVE CLEAN DMV RECORD




    Recruiter: Cristal Smith

    Email:
  • Valid City, State or Zip Code: Belpre
    Job Type : Permanent
    Date: Wednesday, 29 September 2021
    The Production Engineer is responsible for development and long term strategy implementation within the operating unit.

    Key Responsibilities


    * Identify and prioritize on-going unit performance gap issues and work with the Area Technical Manager to develop plans to resolve those gaps
    * Provides Technical Assurance for change activities within the operating unit
    * Ownership of the unit HSE Management Systems (PSSR Leader, PSS, SOCs, Overpressures, Process Descriptions, and MOC)
    * Ownership of Unit Production / Capacity and Reliability Management Systems
    * Ownership of Unit Quality Management Systems
    * Primary owner for customer complaint resolution
    * Interface for Projects within the Operating Unit
    * Applies technical principles, theories and concepts.
    * Provides technical solutions to a wide range of difficult problems.
    * Exercises considerable latitude in determining technical objectives of assignments.
    * Plans and conducts assignments generally involving the larger and more important projects.
    * Able to solve complex operating issues through collaboration with peers, and the assistance of direct reports or next management.
    * Manages small to intermediate project teams.
    * Defines the scope and objectives of projects based on operational needs.
    * Provide direction to junior engineers and evaluates their work.
    * Determine scope, budget and timeline of projects, understanding the profitability impact of projects and manages accordingly.
    * Own the financial results of assigned projects in functional areas and influences others to do the same

    Required Skills


    * 4+ years of engineering experience.
    * Knowledge and capability to use advanced systematic and creative problem solving tools.
    * Ability to conduct briefings to senior management.
    * Supervisory training and project management.
    * Strong interpersonal skills with the ability to interface seamlessly with operating technicians, support staff, technical staff, and other aspects of the business such as supply chain and sales.
    * Ability to frame up, prioritize and execute process improvements according to value, cost and risk with limited supervision.
    * Opportunity identification, solution development, cost estimating, field implementation, and technical success within budget for small capital projects.
    * Demonstrated leadership skills and the ability to work and communicate effectively with all levels of employees to plan, organize and complete multiple programs from inception to start up.
    * Manufacturing experience in an OSHA 1910.119 PSM facility (large quantities of flammable or highly hazardous chemicals) with demonstrated excellent safe work behavior
    * Comfortable functioning in a variety of roles ranging from plant floor troubleshooting and problem solving to leading long term process improvement projects.
    * Polymerization knowledge and experience, especially if in a solvent based system is preferred.
    * Experience with chemical batch processing is preferred.

    Education, Certifications & Licenses


    * Bachelor Degree in Chemical Engineering or other related field of study.
    * Six Sigma and/or Lean Manufacturing experience preferred. Green Belt or Black Belt certification would be advantageous
  • Valid City, State or Zip Code: Albany
    Job Type : Permanent
    Date: Tuesday, 28 September 2021
    Operates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.

    Primary Responsibilities:


    * Performance of ongoing preventive and repair response work orders on facility mechanical, electrical and other installed systems, equipment, and other components.

    * Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.

    * Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.

    * Respond effectively to all emergencies.

    * Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.

    * Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.

    * Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.

    * Maintain compliance to State, County, or City Ordinances, Codes, or Laws.

    * Must be willing and able to support any after hours building related activity as required.

    * Attend periodic training seminars.

    * Other assigned operational tasks as may be typically expected of the Mobile Engineer role.

    Qualifications:


    * Candidate must possess and maintain a valid state driver's license

    * Universal CFC recovery certification

    * Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance and overall system design and application.

    * Candidate will be provided tools required to perform assigned work scope.

    * Must be able to lift up to 80 lbs and climb up to 30 ft ladders.

    * On call duties and overtime as required.

    * Must pass background, drug/alcohol, and MVR screening process.
  • Valid City, State or Zip Code: Scarborough
    Job Type : Contract
    Date: Tuesday, 28 September 2021
    Manufacturing Engineer Technician Job in Scarborough, Maine

    ⏰ Schedule: 4:45a-5:15p 📆 Assignment Length: Long-Term Temp

    Do you have an associates degree in electrical engineering or a related field? Are you an experienced individual in the manufacturing field looking for a change of pace? Would you like a steady, long-term job with a great company? We are now hiring a Manufacturing Engineer Technician for a client in Scarborough. Apply today!

    ☑️ Perks:
    * Great pay rate!
    * Exciting work with an innovative company
    * Access to health, dental, and vision benefits
    * Maine earned paid leave

    ☑️ Duties:
    * Machine and operation troubleshooting
    * Use computer programs to set up and troubleshoot equipment
    * Lead the implementation of innovative, problem-solving methods
    * Communicate unexpected equipment downtime
    * Maintain records per company standard

    ☑️ Requirements:
    * Associates Degree in mechanics, manufacturing, electrical engineering, or similar
    * 7+ years of experience in maintenance of automated production equipment
    * 3+ years of experience in the medical device industry

    We've made it easy to apply for this Manufacturing Engineer Technician job in Scarborough, Maine. Simply contact us by choosing an option below.

    ✔️ Apply Now: see below
    📱 Text: 'MET' to 207.806.5398
    📞 Call: 207.774.8258
    📧 Email: [email protected]
  • Valid City, State or Zip Code: Eden Prairie
    Job Type : Permanent
    Date: Tuesday, 28 September 2021
    Our client is seeking a Design Engineer with injection molding experience to be responsible for designing, developing, validating and industrializing mechanical and electro-mechanical components. This engineer will partner with other engineering disciplines and cross-functional teams to bring comprehensive digital hearing systems and solutions to our client's customers.

    Position Responsibilities:



    * Design new and innovative standard and custom hearing aids and other auxiliary devices which meet product requirements. Partner with designers to lead component and system-level design and development from concept through Industrialization.
    * Coordinate design verification planning and tests for component, system and product level by partnering with the Quality team.
    * Identify and implement DFX opportunities early in the product development cycle by collaborating with NPI and Operations.
    * Provide input into project planning and management to ensure that project schedules are met and areas of high risk addressed.

    Position Qualifications:



    * Bachelor's Degree in Engineering Mechanics, Mechanical Engineering, Aerospace Engineering or related degree
    * Targeting engineers with 3-5 years of experience
    * Advanced proficiency in Creo required.
    * Intermediate to Advanced knowledge of injection molding processing and tooling required.
    * Intermediate to Advanced knowledge of materials and processes used to manufacture injection-molded plastic, stamped metal, and elastomeric components required.
    * Intermediate to Advanced knowledge of product development best practices (i.e. DFM, DOE, DFMEA, Lean PD, etc…) required.
    * Intermediate knowledge of geometric dimensioning and tolerancing required.
    * Basic understanding of acoustics and vibration highly desirable.
  • Valid City, State or Zip Code: Belpre
    Job Type : Permanent
    Date: Tuesday, 28 September 2021
    Key Responsibilities


    * Applies technical principles, theories and concepts to design and troubleshooting unit processes.
    * Ability to apply advanced process engineering tools, such as Aspen, HYSYS, PIPE-FLO, etc. when required
    * Provides technical solutions to a wide range of difficult problems in various areas (e.g. HSES, Quality, Reliability, Cost Savings, etc.)
    * Plans and conducts assignments involving large and complex projects, while still completing several small to medium assignments at the same time
    * Able to solve complex operating issues through collaboration with peers, production units, or management.
    * Leads small to intermediate teams in process improvement, root cause analysis, or other structured problem solving methods.
    * Defines the scope and objectives of projects based on operational needs.
    * Provide operational support including test run coverage, project start-up and commissioning, or technical support for issues.
    * Provide mentoring to junior engineers and evaluates their work.
    * Determine scope, budget and timeline of projects, understanding the profitability impact of projects and manages accordingly.
    * Move capital project design from concept to 30% engineered with minimal assistance from others.
    * Become part of plant technical expertise in assigned areas through training and work assignments.

    Required Skills


    * Engineering experience.
    * Identify and implement different methods of structured problem solving depending on task.
    * Able to handle multiple assignments and manage priorities.
    * Communicates effectively from operator level to senior management.
    * Demonstrated leader of project or problem solving teams.
    * Self-starter.
    * Able to function in different team roles including leader, member, & technical expert.

    Preferred Skills


    * Lean Six Sigma
    * Root Cause Analysis
    * Process Safety Management (PSM) familiarity

    Education, Certifications & Licenses


    * Bachelor Degree in designated Engineering, preferably Chemical Engineering.
  • Valid City, State or Zip Code: Milwaukee
    Job Type : Permanent
    Date: Monday, 27 September 2021
    Electrical Design Engineer

    We are currently seeking to fill a key Electrical Design Engineer position for a highly respected global heavy equipment manufacturer. Our winning candidate will be a key member of an experienced engineering team and will play a key role in the development for a variety of construction equipment product lines which are Designed & Built in the USA!

    This is a full-time/permanent position that will have high visibility within the engineering ranks of this company, which should be a plus for qualified & career minded candidates looking for a challenging role that also provides the opportunity for future advancement. Other perks include casual work attire, flexible and non-traditional work week schedules, health and well-being programs including an onsite gym, and many competitive benefits that will get you excited to choose our client as your next employer.

    What You Will Do:

    As an Electrical Design Engineer, you will assist in the design and implementation of both current product optimization and new product development. You will work with the electrical and software development team (as well as additional stakeholders such as product management, manufacturing, and purchasing) to see projects through from conception to production, and beyond.

    Design:

    * Create and maintain electrical schematics and wire harness drawings
    * Assist in the definition of software functions (machine control and HMI)
    * Acquire and analyze electrical system data
    * Research and understand the applicable industry and government standards (ISO, SAE, etc.)

    Documentation:

    * Supports the creation of machine documentation (schematics, manuals, training, troubleshooting)
    * Create and manage software requirement documentation
    * Create and manage testing documentation

    Product Support:

    * Provide hands on manufacturing support to keep production schedule on time
    * Work with field technicians and support services to investigate and resolve customer concerns

    Product Testing:

    * Define testing requirements for new software functions (machine control and HMI)
    * Use data acquisition equipment to collect performance information
    * Create test setups for functional validation
    * Evaluate results and determine/coordinate appropriate issue resolution
    * Troubleshoot issues as they arise during prototyping

    WHAT YOU WILL NEED:

    Minimum Qualifications:

    * Bachelor of Science Electrical Engineering
    * 3-5 years design engineering experience in a manufacturing environment
    * Proficient knowledge of electronic circuit design, components, systems, and controls
    * Practical knowledge of data acquisition (discrete signals and CAN)
    * Practical knowledge of communication protocols (CAN, UDS, J1939)
    * Practical CAD software experience
    * Proficient computer skills including Word, Excel, PowerPoint

    Preferred Qualifications:

    * Prior experience with construction and/or industrial equipment
    * Prior experience with the following CAD tools: Siemens NX, Zuken E3
    * Prior experience with following software development tools: JIRA, Confluence, Vector CANalyzer
    * Familiarity with C programming and/or Sontheim MDT Authoring Tool is a plus
  • Valid City, State or Zip Code: Bloomington
    Job Type : Permanent
    Date: Monday, 27 September 2021
    * Ensure plant compliance with all environmental regulations, company policies, and procedures
    * Ensure all information, readings, testing, and observations, are recorded or conducted as required by environmental regulations and permit conditions
    * Reporting
    * Prepare air, water, and waste renewal and permit applications
    * Maintain and update the plant's Source Reduction Strategy for solid and residual waste generated at the plant
    * Coordinate plant's efforts to secure permits and permission to utilize alternative non-hazardous raw materials, industrial water and alternative non-hazardous fuels
    * Manage the implementation and ongoing activities of the Plant's Environmental Management Information System
    * Train and mentor plant personnel on relevant environmental guidelines and practices

    Essential Experience and Skills


    * Bachelor's degree in Environmental Engineering or relevant discipline
    * Strong working knowledge of MSHA
    * Good understanding of cement manufacturing processes and industry challenges
    * Strong communication skills to interact with multiple levels of the organization
    * Attention to detail and excellent record keeping and organizational skills
    * Working knowledge of Federal, State, and Local requirements

    Preferred Experience and Skills


    * 3 or more years of environmental experience related to cement manufacturing
  • Valid City, State or Zip Code: Buffalo
    Job Type : Contract
    Date: Monday, 27 September 2021
    HVAC Engineer

    Operates, inspects, and maintains all HVAC, mechanical, electrical and plumbing equipment and systems in assigned facilities to obtain most efficient operating results and life expectancy. Assures that equipment is being maintained in an energy efficient, safe manner and down time is reduced to a minimum by anticipation of necessary repairs keeping records of past operating experiences. Performs inspections and repairs to assigned property interior and exterior areas, including walls and flooring, installed fixtures, roofing systems, lighting, etc.

    Primary Responsibilities:


    * Performance of ongoing preventive and repair response work orders on facility mechanical, electrical and other installed systems, equipment, and other components.

    * Maintain, operate, and repair all HVAC systems and associated equipment, electrical distribution equipment, plumbing systems, building interior/exterior repair, and related grounds as it pertains to assigned buildings.

    * Perform assigned facility inspections and due diligence efforts, reporting on as found conditions impacting satisfactory client occupancy and operations.

    * Respond effectively to all emergencies.

    * Prepare and submit to management summary reports listing conditions found in the performance of assigned work, and recommend and/or suggest action to be taken.

    * Study and become familiar with the various items of equipment, and the methods required to use them properly, that are required in every day activities. This to include building automation systems, fire / life safety systems, and any other building related equipment.

    * Comply with all safety procedures, maintaining good housekeeping and safety of work areas. Recognize danger and safety hazards and propose methods to eliminate them.

    * Maintain compliance to State, County, or City Ordinances, Codes, or Laws.

    * Must be willing and able to support any after hours building related activity as required.

    * Attend periodic training seminars.

    * Other assigned operational tasks as may be typically expected of the Mobile Engineer role.

    Qualifications:


    * Candidate must possess and maintain a valid state driver's license

    * Universal CFC recovery certification

    * Minimum of four (4) years of technical experience in all aspects of building engineering with a strong background in technical aspects of packaged HVAC, plumbing electrical equipment repair and maintenance and overall system design and application.

    * Candidate will be provided tools required to perform assigned work scope.

    * Must be able to lift up to 80 lbs and climb up to 30 ft ladders.

    * On call duties and overtime as required.

    * Must pass background, drug/alcohol, and MVR screening process.