JOB SUMMARY
Perform and document inspection checks, tests or results of aerospace parts in accordance with company documented procedures. Inspection areas include receiving, in-process, final, or shipping inspection.

Pay Rate: $35 hourly
Shift: 12:00 AM Hours: 8:00am to 5:00pm

MAJOR RESPONSIBILITIES % OF TIME
50% - GENERAL REQUIREMENTS:
*Record and document each inspection process in accordance with company documented procedures.
*Create rejection reports for non-conforming parts.
*Perform and validate First Article Inspections per AS9102 or Customer's specification.
*Ensure test equipment is within the adequate calibration status period for all measurement equipment and is conformed to the company's preventive maintenance program.
*Must comply to the company documented Quality System and AS9100 standards.
*Periodically rotate to other functions performing required quality control activities to support business needs, this may require travel to remote locations.
At time of shipment, verify configuration control and serial number accounting.

25% - MECHANICAL INSPECTION:
*Performs mechanical inspections on subassemblies or finished products to Engineering drawing and cosmetic requirements using standard measurement tools or tooling and visual assessment.
*Performs and conducts visual inspections, verification of components, subassemblies or finished products to Engineering drawings by confirming specifications and measurement tests.

25% - ELECTRICAL INSPECTION:
*Inspect in-process and final parts and assemblies as they are built by Manufacturing.
*Perform electrical and/or mechanical function testing per Acceptance Test Procedures, as applicable

Do you want to work for an aerospace company? Do you have experience as a Painter? Are you comfortable utilizing powered tools, such as a sander? If you are ready to get to work, please read on as Manpower is looking to bring an Apprentice Painter to its winning team!

What's in it for you?

* Full time hours: 5am - 1:30pm
* Monday-Friday
* Weekly pay (Every Friday)
* 2- month contract (based on needs of client)
* Pay Rate: $17/hr.
* Located in Gardena, CA

What you'll be doing:

* Laminating surface for application of paint coatings
* Interpreting Work Order Instructions
* Filling out Manufacturing Illustrations
* Using air powered tools, such as a sander
* Sanding of surfaces and sanding down of those resins
* Other duties as directed by client

Who we are looking for:

* Someone with great interpersonal skills
* Someone with precise attention to detail and punctuality
* Someone with basic knowledge of power tools
* Someone who has experience using chemicals such as isopropyl alcohol, acetone, ect.
* Someone who has basic oven operations
* Someone who can lift over 50lbs
* Someone who can work overtime as needed

This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Stop your job search and apply today. Do you need more information? Contact ChaVon at: [email protected] We love referrals so please share our job with friends and family.

We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance

Do you have 5+ years' experience as an Experimental Machinist experience? Do you have experience performing semi-complex machining operations to support product and production process development? Are you able to program, setup, and operate a CNC Milling machine? Are you interested in working with a leading company that manufactures respiratory devices and aids in biomedical advancement? Do you have an interest in aiding with the suppression of the COVID - 19 pandemic? Are you in need of getting back to work ASAP during these uncertain times? If so, please read on!

What's in it for you?
* Full Time hours
* Work Schedule: Monday - Friday
* Work Time: 8am - 4:30pm
* Duration: Based on needs of client
* Competitive pay: $25.00 - $31.00

What you'll be doing:
Performs to individual goals established during performance reviews and/or goal setting meetings.
* Performing to individual goals established during performance reviews and/or goal setting meetings
* Designing fixtures, tooling, and experimental parts to meet special engineering needs.
* Consulting with engineer and other personnel regarding product information.
* Analyzing written specifications, drawings, rough sketches, and verbal instructions to plan layout and determine sequence of operations.
* Selecting metal stock and lays out design according to dimensions computed from scale drawings.
* Setting up and operating machine shop equipment, tools and machines to machine parts to specifications, and verifies conformance of parts to specifications.
* Evaluating experimental procedures and recommending changes or modifications for efficiency and adaptability to setup and production.
* Assuring product meets or exceeds company and customer expectations of quality and workmanship.
* Accurately reporting production data.
* Immediately reporting any, and all unsafe conditions and/or injuries to supervisor.
* Reading, understanding and adhering to appropriate company and department policies and procedures to ensure legal compliance, safe and productive workplace and quality products and customer service.
* Immediately report any, and all unsafe conditions and/or work- related injuries/illnesses to supervisor.
* Performing other duties, as assigned, to maintain efficiency throughout the company.

Who we are looking for:
* 2+ of machining operations experience MANDATORY
* Someone who is skilled in setting up and operating Machine Shop Machines (lathes, mills, grinding machines, bandsaw, dress press, etc.)
* Someone who can Program, Setup and Operate CNC Milling Machine and Wire EDM is highly desired
* Someone who can speak English and Spanish highly desired
* Someone who can communicate effectively in written and oral language
* Someone who has knowledge of Basic Shop Math
* Someone who can stand for long periods of time (as much as 7 - 10 hours)
* Someone who can lift up to 25lbs.
* Someone with a "Yes, can do!" Attitude

Stop your job search and apply today. Do you need more information? Contact ChaVon at: [email protected] We love referrals so please share our job with friends and family.

We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance

Conduct tests to determine quality of raw materials, bulk intermediate and finished products. May conduct stability sample tests. Calibrate, validate, or maintain laboratory equipment. Complete documentation needed to support testing procedures including data capture forms, equipment logbooks, or inventory forms. Monitor testing procedures to ensure that all tests are performed according to established item specifications, standard test methods, or protocols.

Our client is a military aerospace cable assembly manufacturing company in Chatsworth, CA is seeking an experienced Production Assembler.

What's in it for you?
Full time hours
Shift: 1st Shift
Schedule: Monday-Thursday / 10hr days
Weekly pay (Every Friday)
Pay Rate: $15.00 - $17.00

Position Summary
Experienced in electronic assembly and hand soldering of standard mil-spec and high stranded wire cable assemblies, connectors, wired enclosures and interconnect devices for military and or aerospace applications.

Essential Duties and Responsibilities
Perform first article, in-process and final inspection of military cable assemblies, wire harnesses, connectors and wired enclosures.
Perform inspection to verify compliance of product manufactured to print.
Ability to inspect molded parts including flex tests and hardness
Using automated test equipment and perform manual DWV and IR testing.
Working knowledge IPC-A-620 and J-STD-001.
Experience with soldering and crimping
Ability to read and interpret assembly drawings, parts lists, Bill of Materials, schematics/wire lists, inspection instructions, workmanship standards, process and test specifications.
Be able to perform inspection functions using a microscope and or magnification lights.
Compile special material / test data packages when required by our customers.
Be familiar with writing Non-Conforming Material Reports.
Perform audits of calibrated equipment and date sensitive material for compliance.
Ability to use precision measuring devices (calipers, micrometers, tape measures, dial indicators, height gauges, multi-meters & pull testers (contact retention testing).

Education/ Qualifications
High School or GED
A minimum of two (3) years' experience with inspecting and/or working with connectors, electric cables and harnesses.
Computer knowledge is recommended for Microsoft Outlook, Excel & Word.
Ability to priorities and work in a team setting

Physical Demands:
Light lifting, up to 25 lbs. and the performance of job duties that requires seating down for a long period of time.
Must be able to perform repetitive hand movements.
Employee must be able to work in a fast-paced environment to meet production schedules and quality requirements.

We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance

Stop your job search and apply today. We love referrals so please share our job with friends and family.

If you have qualified and/or relative experience, please contact Miguel Carabez at [email protected]