PAY: $18 - $22
DUTIES AND RESPONSIBILITIES:
* Perform inspection of electro-mechanical products under general supervision.
* Use common inspection tools to perform inspection and record results.
* Review of product documentation, including CoC, material certs, routers and travelers.
* Familiar with and capable of completing AS9102 First Article Inspection Report.
* May perform receiving inspection, in-process inspection, and inspection of finished product.
* May perform visual inspection of weld, braze, and solder joints.
* May perform visual inspection of surface finish, coated surfaces and general workmanship of product.
* May inspect tooling and fixtures.
* May support assigned production cell by addressing quality related technical issues.
* May participate in activities related to non-conforming product.
* May work with engineering groups to help develop common inspection methods.
* Works with Quality Engineers in developing inspection plans.
* May, as directed, monitor production areas for compliance with standards.
* Perform other job-related duties as assigned.

QUALIFICATIONS:
Skills
* Thorough knowledge of mechanical inspection tools, calipers, micrometers, comparators, toolmaker's microscope, indicators, surface plate, thread gauge and other common inspection tools.
* Proficiency and understanding of GD&T and blueprint reading.
* Basic understanding of aerospace quality management systems.
* Excellent communication skills
* Microsoft Office data entry skills
* CMM experience
Education: Requires technical training courses in a related field or the equivalent in prior work experience.

Years of experience: 3 or more years Quality Inspector experience.

OTHER PREFERRED ATTRIBUTES OR QUALIFICATIONS (not required):
* Experience with electromechanical sensors and systems a plus.
* Experienced or trained in a world class-manufacturing environment with familiarity in Lean and Six Sigma activities.
* Knowledge of AS9100/ISO9001, GD&T, SPC, FMEA, and other related industry standards a plus.
* Programming of Mitutoyo CMM with MCOSMOS software.
CERTIFICATIONS OR MEMBERSHIPS TO ORGANIZATIONS (state if desired or required):
* ASQ Certification as a Quality Inspector, Quality Technician or Quality Process Analyst desired

The Box build Assembler will perform preparation of components for assembly; assemble electronic & mechanical components onto printed circuit assemblies and sub-assemblies utilizing process procedures; written instructions, diagrams and blueprints; work may be conducted by using a lighted magnifying lens or under a microscope, utilizing small hand tools, machinery or other applicable materials.

Responsibilities:
*Assemble electronic & mechanical components onto printed circuit assemblies and sub-assemblies utilizing process procedures, written instructions, diagrams and blueprints.
*Communicate and take direction from lead/supervisor.
*Maintain the highest level of quality standards at all times.
*Perform repetitive hand motion.
*Use various hand tools (pliers, rulers, cutters, hand-formers, etc.)
*Work with miniature to large components that may require visual magnification.
*Read and interpret assembly instructions, drawings and work instruction processes.

Requirements:
*High level of attention to detail.
*Sense of urgency, successful at meeting deadlines.
*Effective teamwork skills.
*High School Diploma or GED.
*Previous hand assembly experience preferred.

For immediate consideration apply with your updated resume!

Longmont based manufacturing company is seeking an Electronic Assembler .

The Solderer will perform a variety of assembly operations on electronic components and subassemblies on the production line utilizing work process procedures, written instructions, diagrams, and specifications. Primary work is conducted under a lighted magnified lens, utilizing small hand tools, machinery or applicable materials, while soldering components and assembling to printed circuit boards utilizing a soldering iron.

Responsibilities:

Primary component type soldering of thru-hole devices only.

Melt and apply solder along adjoining edges of work pieces to solder joints using a soldering iron.

Clean/polish work pieces and tip of soldering iron using chemical solution, file, or wire brush.

Apply flux to work piece surfaces in preparation for soldering.

Heat soldering iron or work piece to specified temperature for soldering, using electric current.

Examine product to verify conformance to workmanship standards

Requirements:

*Ability to pass a soldering test
*2-3 yrs of previous soldering experience on printed circuit boards
*Excellent component recognition
*High School diploma or GED

For immediate consideration please submit your resume.

What's in it for you?

* Full time hours
* Monday to Friday
* Day Shift: 7:30 am to 3:30 pm
* Wage: $14.00 / hour + 4% vacation pay paid out every week
* Temporary to permanent opportunity

What is the job?

Assembling or modifying electrical or electronic equipment such as:

* computers
* test equipment telemetering systems
* electric motors
* batteries

What you bring to the job?

* Attention to detail
* Following health and safety guidelines
* Some math abilities to figure out waste
* Standing for up to 8 hours
* Attendance and punctuality are key

No allergies to latex or fiberglass.



HR must be alerted if associate has a pace maker



__Timesheets are submitted manually__

We love referrals. Visit www.manpower.ca/referral to easily share opportunities with friends and family and increase your compensation for each successful referral.

Should you, or anyone you know be the right fit for this opportunity, connect with one of our recruiters today by phone or text! (519) 571 - 7910 or send your resume to kristen.wierenga@manpower.com

Manpower Group recognizes the importance of providing an accessible and barrier-free environment. We are committed to creating a welcoming, fair and inclusive environment by offering equal opportunity to access our services. At Manpower Group, we are committed to providing accommodations, and will work with you to meet your needs.

Manufacturing company in Longmont is looking for a Quality Inspector to perform first article SMT and final inspection of printed circuit assemblies.

Short term temp-to-hire or direct hire opportunity for the right candidate.

Primary or Major Responsibilities:

Examine the circuit boards to detect defects such as shorts, excess or missing solder, scratches, cracks, and placement of components.
Maintain quality standards by approving material at final inspection for all products.
Perform 1st piece inspections for Surface Mount and through hole assemblies.
Prepare Customer 1st article documentation prior to shipment.
Perform Final inspection.
Possess knowledge of a wide variety of thru-hole and surface mount parts with respect to polarity and component identification.
Experience and familiarity of use of common electronic tools.
Assemble, solder, and inspect small parts under a microscope.
Identify units that fail tests or tolerance levels and repair as necessary.
Understanding of the 1st Article and Visual Factory processes.
Provide and document detailed information for production records.
IPC-610 Certification is preferred

For immediate consideration please submit your resume.

Manufacturing company in Longmont is looking for a Quality Inspector to perform first article SMT and final inspection of printed circuit assemblies.

Short term temp-to-hire or direct hire opportunity for the right candidate.

Primary or Major Responsibilities:

Examine the circuit boards to detect defects such as shorts, excess or missing solder, scratches, cracks, and placement of components.
Maintain quality standards by approving material at final inspection for all products.
Perform 1st piece inspections for Surface Mount and through hole assemblies.
Prepare Customer 1st article documentation prior to shipment.
Perform Final inspection.
Possess knowledge of a wide variety of thru-hole and surface mount parts with respect to polarity and component identification.
Experience and familiarity of use of common electronic tools.
Assemble, solder, and inspect small parts under a microscope.
Identify units that fail tests or tolerance levels and repair as necessary.
Understanding of the 1st Article and Visual Factory processes.
Provide and document detailed information for production records.
IPC-610 Certification is preferred

For immediate consideration please submit your resume.

Quality Control Inspector performs visual/mechanical inspections on simple to moderately complex components, assemblies and sub assemblies to ensure compliance to applicable quality specification and standards.
Responsibilities:
- Perform incoming inspections on Machined parts to prints/drawings
- Document inspection Results
- Perform outgoing final inspections on completed systems
- Investigate product & process quality
- Write, revise & review standard operating procedures
- Interpret & implement QA standards
- Interface with Government & suppliers

Longmont based manufacturing company is seeking a Stockroom Associate.

Responsibilities:
Receive parts to be stocked in an orderly and accessible manner on shelves in stockroom;
Examine and inspect stock items for wear or defects, reporting any damage to supervisors;
Assemble kits using existing inventory for productions builds of new product;
Perform scheduled cycle counts of selected inventory parts accurately.

Required Skills:
High School Diploma or equivalent (GED)

Desired Skills:
Over 1 year of experience working in shipping and receiving;
Basic knowledge of electronic components is a plus;
Basic computer skills;
Organized and a self starter.
Work Schedule:

2nd shift: Monday - Friday (3:30pm - midnight)

Pay:

$15 - $16/Hr

For immediate consideration please submit your resume.

Manpower is currently assisting a local company in York, PA for Test Engineers.

As a Test Engineer, you will Plan, develop, and conduct tests on electronic components, products, assemblies, and systems, applying knowledge and principles of electronic theory, testing methodology and procedures, and electronic engineering.

If you have experience reading blueprints/schematics/specs and excellent communication skills, you are encouraged to apply!

We have openings on 1st shift, 6:00am to 2:30pm. Pay for this position will be $15.00 an hour. This is a temporary-to-hire opportunity. Candidates who perform well and display satisfactory attendance during contract period will be considered as a permanent candidate for the role!

Job Requirements
Bachelor Degree in Electrical Engineering preferred, Associates degree with strong work experience may be considered.
Familiarity with Microsoft Excel and Word.
IPC-A-610 knowledge/familiarity is a plus.
Ability to precisely communicate with all areas, including Production, Quality, and Engineering.

Other requirements of the role include:

* All applicants must have steady work history with a good attendance record
* Ability to repeatedly lift up to 30lbs and occasionally lift up to 50lbs
* Pre-employment background check & drug screen will be required as a condition of employment - Free for all Manpower candidates!

Candidates can apply directly to this posting or at www.manpower.com. Please call Manpower at 717-764-7841 to set up an interview after applying!

We offer our employees great career opportunities, competitive wages, holiday/service bonus, Option to take free college courses and skills training, access to health insurance options after only 40 hours and more!

Referrals are welcome and rewarded ($50 referral bonus)

Manpower is an equal opportunity employer.

Do you have Soldering Skills? Do you pride yourself on your excellent work ethic?

Manpower is hiring skilled Solderers and Machine Operators with our client in the Yorkanna Area.
In this position, you will be required to use small hand tools and pay close attention to detail.

If you have technical, quality, assembler, material handler, or other related level experience, you are encouraged to apply!

What the position offers you:
● Full Time Hours
● Monday-Friday 6am-2:30pm
● Pay Rate of $11 - $12 per hour depending on experience
● Temp to hire depending on performance and attendance
● Pay increases after hired on

What you bring to the job:
● A strong work ethic and a proven record of reliability
● The ability to lift up to 50 lbs, as well as stand and walk for extended periods of time
● Full time, weekday availability
● A positive attitude and the ability to work well as part of a team

Candidates can apply directly to this posting or at www.manpower.com. Please call Manpower at 717-764-7841 to set up an interview after applying!

We offer our employees great career opportunities, competitive wages, holiday/service bonus, access to health insurance options after only 40 hours and more!

Referrals are welcome and rewarded ($50 referral bonus)

Manpower is an equal opportunity employer.

Electrical Installer

Are you looking for steady hours and weekly paychecks? Manpower has immediate openings for electrical installers on 3rd shift.

What's in it for you?

-Full time hours
-Night shift: 10:00pm-6:30am (Third shift)
-Competitive wages $25 per hour
-Temporary 10 week assignment
-Option to take free college courses and skills training

What is the job?

-Installing electrical equipment and fixtures
-Comfortable using a scissor lift
-Must adhere to all quality and safety codes

What do you bring to the job?

-Familiarity with electrical equipment and hand tools
-Previous experience with scissor lift
-Strong problem solving and critical thinking skills
-Ability to pass a background check and drug screen

Electrical Engineer direct hire career opportunities are available at an industry leader in electronics manufacturing in Lancaster, PA. Both require ability to obtain/ maintain a Secret Level Security Clearance.

1) Electrical Design Engineer (entry and mid-level open) Will design, document, debug, and test assigned hardware and software for new/existing products (VHDL modules & hardware for embedded systems)

Qualifications: * BSEE and 5+ years of experience required for mid-level (MSEE is desired) * Experience working with Microwave/RF products on military programs is strongly desired. * Knowledge of digital and analog circuits and experience using embedded processors, digital signal processors, FPGA / VHDL, analog to digital converters, digital to analog converters, digital input/outputs, serial communications protocols

2) Sr. RF Systems Engineer - Will lead the analysis and design efforts for systems associated with UAVs, Radars, Antenna, Telemetry, and EW and Communication Systems. Will perform detailed design of RF subsystems and subassemblies for complex electronics DoD systems and applications, and provide RF Design expertise in support of specification reviews, design reviews, modeling and simulations and system integration and test.

Qualifications: * Bachelor's degree in Electrical Engineering or related field required. * Strong customer-service orientation. * Analytical and problem-solving abilities, with keen attention to detail. * Effective interpersonal skills and relationship-building skills. * 7+ years' related RF experience working in a team-oriented, collaborative environment using MatLab or similar tools for system analysis * Strong written and oral communications. * Self-motivated and directed. * Ability to effectively prioritize and execute tasks in a high-pressure environment.



Apply now for consideration!

We have an immediate need for laborers in the Meyersdale area to work with a company that recycles electronic equipment including, TVs, VCRs and computers. We are looking for people who work well with their hands and have experience with hand tools. Lifting of up to 60 lbs. is required. Daylight hours with overtime possible.
There will also be a need for people with machine operating experience.
The qualified candidate will be able to pass a drug screen and criminal background check and have a High School diploma or GED.
This is a long term, possible permanent opportunity with a growing company. If interested please respond with an updated resume.

GENERAL MAINTENANCE WORKER

General Purpose:

The General Maintenance Worker performs a variety of duties to maintain, repair and install equipment and physical structures. Plumber or electrician is a must.
Working schedule : Monday to Friday. 7:00am to 3:30 pm.
Pay rate: $20.00 per hour

Essential (Primary) Functions:

The primary responsibility of the General Maintenance Worker is to provide the highest quality of service to customers at all times. Other responsibilities include following specifications, blueprints, manuals and schematic drawings for installation, maintenance and repair of structures and equipment. The General Maintenance Worker uses hand tools, power tools, and precision measuring and testing devices to test, diagnose and repair equipment. In order to detect malfunctions and repair equipment, the General Maintenance Worker must be able to dismantle equipment and install working parts. The General Maintenance Worker also makes structural changes or repairs to masonry, roofing, woodwork, walls and furnishings, patches or replaces plaster/plaster board, paints walls and ceilings and trims, cuts and lays flooring, (linoleum, tile, carpet, etc.). In addition, the General Maintenance Worker may bend/cut conduit pipe and wire, drill holes in walls, floors and ceilings for connections, clear clogged drains and replace plumbing fixtures. The General Maintenance Worker connects water supplies and drainage pipelines and performs simple wiring and maintenance repair. The General Maintenance Worker must operate motor vehicles, lift/move equipment, materials, supplies and tools, and wear protective clothing as required by the work environment or government regulations. The General Maintenance Worker must operate a computer, telephone, calculator, television monitor and kitchen appliances and follow all Sodexho, client and regulatory agency policies.. The General Maintenance Worker may perform other duties as assigned by a supervisor.

Requirements:

Title General Maintenance Worker I

*High School or vocational training or equivalent experience (i.e., 1 year of experience equals 1 year of education)
*May require a valid state driver/operator's license

Title General Maintenance Worker II

*3 to 5 years of experience as a Level I
*May require valid a state driver/operator's license

Position: Assembly Tech II
Location: MESA
Pay: $15.00 to $17/hourly
Hours: 6:00 AM to 2:30 PM Monday-Friday
Length: Contract or Long Term
NO DRUG OR BACKGROUND CHECK REQUIRED

Position to start Right Away!
Please provide resume showing experience and certifications in the skills below:
Enhanced fabrication knowledge of complex, military-grade cable assemblies (i.e. shielding termination techniques, multi-legged breakouts, cable form boards).
Intermediate experience with reading mechanical prints and wiring diagrams.
IPC J-STD-001 certification strongly preferred (current or expired).
Complete familiarity with IPC/WHMA-A-620 to include but not limited to:
Mil-spec connectors (both solder and crimp)
Solder cup terminations
Solder Sleeves
Familiarity with IPC-A-610 to include but not limited to:
SMT and Through-hole component terminations
Wire-to-board terminations (i.e. through-hole, turret, post)
Capability to work under magnification
Experience with epoxy/adhesives
Experience with torquing hardware

IT Tech

Are you looking for steady hours and weekly paychecks? Manpower has an immediate opening for an IT Tech.

What's in it for you?
-Part time hours
-Day Shift:
-Competitive wage @ $15.00
-Option to take free college courses and skills training

What is the job?
-install software, monitors, etc.
-Maintaining a clean work environment

What you bring to the job?
-Prior IT experience
-Great attitude and ability to work in a team
-High School Diploma or GED
-Ability to pass a Background Check and Drug Screen

Stop your job search and apply today. Do you need more information? Contact our recruiters at 269-983-1155. We love referrals so please share our job with friends and family. Also, check out Manpower's career platform with tools and resources to prepare you for today and tomorrow's jobs at www.manpower.com/mypath

PART TIME Soldering Assembly Technicians needed immediately: Responsible for production and assembly of high quality electrical muscle stimulator (EMS). Includes detailed assembly and operation of various equipment, hand tools, scopes and machinery.

Duties and Responsibilities:

* Assembles sub-assemblies, cables and products, by following written and/or verbal instructions, with use of soldering, hand tools and power tools.
* Interpret technical drawings and procedures, have basic knowledge of technical terms.
* Ability to accurately measure components, and discern part sizes and differences, and fit into designated areas for assembly.
* Understand and read meters for testing.
* Perform repetitive assembly tasks, while maintaining positive attitude, and willingness to be a team player by helping with other duties as assigned.
* Assemble or modify electromechanical equipment or devices, such as servomechanisms, gyros, dynamometers, magnetic drums, tape drives, brakes, control linkage, actuators, and appliances.
* Shipping and receiving.

MUST BE A TEAM PLAYER!

Manpower is currently assisting a local company in Seven Valleys, PA for Assemblers.

The assembler will be responsible for assembling wire cables and small wire harnesses from customer schematic drawings and job orders using hand tools and small hand-held power tools.

Pay for this position will be $11.00 an hour plus overtime as needed. This is a temporary-to-hire opportunity.

We have openings on 1st shift, 7am-3:30pm.

Job Requirements

As an assembler you must be able to work in a team-oriented environment and communicate well with management and fellow employees.

Ideal candidates have very positive attitude and previous experience.

Other requirements of the role include:

All applicants must have steady work history with a good attendance record
Ability to repeatedly lift up to 30lbs and occasionally lift up to 50lbs
Must be able to meet physical demands including standing for extend periods, walking, bending, kneeling and reaching
Ability to read a ruler
High School or GED required
Pre-employment background check & drug screen will be required as a condition of employment - FREE for all Manpower candidates!
Candidates can apply for this position online at www.manpower.comand call Manpower at 717-764-7841 to set up an interview!

We offer our employees great career opportunities, competitive wages, option to take free college courses and skills training, holiday/service bonus, access to health insurance options after only 40 hours and more!

Referrals are welcome and rewarded ($50 referral bonus)

Manpower is an equal opportunity employer.

- Immediate Need for Electronic Assemblers in Elmsford, NY
- 10 Week project
- First Shift - Monday through Friday 8am-5pm
Job Duties-

o Will be assembling circuit boards and pre-designed panels for field technicians
o Looking for candidates with experience in some sort of electronic assembly positions
o 1-2 years of experience with electronic assembly or some form of training from an electronics trade school

Requires a background check and drug screening

Full-Time 1st Shift Repair Tech
Are you known as a person who gets things done? Are you looking for steady hours and every other Friday off and weekly paychecks? Join a fun team in a Medical Device setting where you will be valued for enthusiasm and commitment. Manpower has immediate openings for an Electronic Repair Tech
What's in it for you?
* Full time hours
* 1st Shift 6am to 3:30pm (Monday - Thursday) Fridays (6am to 2:30pm)
* Alternative work schedule (Every other Friday off)
* Competitive wages starting $16.00 per hour
What is the job?
Responsible: for the assembly, test, repair, inspection or quality test of one or more products within the surgical instrumentation, quality or technical services organization. Position performs multiple tasks on an assigned team. Tasks will typically be performed within full-scale production manufacturing operations and include tasks such as routine and repetitive production involving electronic, mechanical, electro mechanical, disposable and probe assembly.

Major Accountabilities: May also perform quality assurance and reliability testing following established methods and procedures. May monitor and verify quality in accordance with statistical process or other control procedures. Must be able to pass all job-specific training or certifications required for core tasks or specialized assignments. May participate in team projects to develop process improvement methods, solutions, and procedures to enhance product quality.
What you bring to the job?
* Previous Assembly experience Preferred
* Great attitude and ability to work in a team
* High School Diploma or equivalent (such as a GED)
* Ability to pass a Background Check and Drug Screen
Stop your job search and apply today. Do you need more information? Contact Deanna Garcia at 949 345-9058 or 949 431-7181. We love referrals so please share our job with friends and family. Also, check out Manpower's career platform with tools and resource to prepare you for today and tomorrow's jobs at www.manpower.com/mypath